GPO USA 6-24x50 Passion 4X Riflescope (MOA Ballistic Reticle) User Manual

Page 31

PASSION™ 4X riflescope turrets have a function where you can set
the “0” on the turret dial to exactly align with the scope indicator
mark on the scope body. This is not required for sighting in. How-
ever, utilizing this function will assure the shooter that the turret
dial has not been bumped or moved from the zero established on
the rifle range. This way, if you need to make adjustments in the
field, you can always return to your exact zero that you established
on the rifle range. Follow these four steps:

1. After the riflescope, has been sighted in on the rifle range, un-

screw both screws on the side of the windage turret and slightly
lift the turret left or right, removing it from the internal gearing.

2. Rotate the turret off the gears to align the 0 on the riflescope to

the scope body adjustment indicator mark.

3. Press the turret down to engage the internal gearing system.

4. Replace to two small set screws.