GPO USA 6-24x50 Passion 4X Riflescope (MOA Ballistic Reticle) - Manual (Page 27)

Adjustment ot the riflescope to the bore
of the barrel
Please have your riflescope mounted and adjusted by an authori-
zed dealer or make sure the riflescope is mounted assuring proper
mounting procedures. Mounting the riflescope properly will assure
shooting and sighting results are positive and will minimize the
risk of injury. It is important to make sure proper eye distance to
the scope (eye relief) is maintained during mounting and shooting.
For detailed instructions on eye relief and proper mounting, see
a certified gunsmith or contact a GPO GmbH & Co. KG technical
specialists.
Factory tips:
• This riflescope is equipped with a mechanically middle centered
reticle. This insure that the reticle image will always stay in the
middle of the optical image.
• It is important to zero in the riflescope if you purchase it new, if
it has been repaired or if other changes such as changes to the
bullet drop have been made. It is also import to zero the rifle if
the scope has been removed from the ring/base system then put
back in place. Removing the scope from the ring or from the
rifle will change the zero.
EN