Epson AcuLaser F CX11N User Manual
Setting your aculaser cx11nf to receive faxes

Setting Your AcuLaser CX11NF to Receive
Faxes
By default your Epson AcuLaser
®
CX11NF is set to receive distinctive
ring pattern telephone calls. This may prevent the AcuLaser CX11NF
from receiving incoming faxes.
If your AcuLaser CX11NF does not pick up a telephone or fax call,
follow these steps to change the DRPD (Distinctive Ring Pattern
Detection) setting:
1. Press
the
Setup
button.
The Setup light turns on and the LCD screen displays Setup
Mode for a few seconds, and then changes to the Setup menu.
2. Press the
d
button twice to select
Fax Settings
. Then press the
r
button.
3. Press the
d
button twice to select
Reception Settings
. Then
press the
r
button.
4. Press the
d
button three times to select
DRPD
. Then press the
r
button.
5. Press the
u
button to select
ALL
. Then press the
r
button.
DRPD is set to
ALL
.
6. Press t
he
Setup
button to exit the menu.
Your telephone company can add a second telephone number to your
main telephone line that will ring with a distinctive pattern. DRPD
allows the AcuLaser CX11NF to distinguish between different ring
patterns. When DRPD is set to
NORMAL
, the AcuLaser CX11NF
will only answer the distinctive ring and ignore the one regular ring.
© 2005 Epson America, Inc. 7/05
CPD-20347
Printed in USA
Setting Your AcuLaser CX11NF to Receive
Faxes
By default your Epson AcuLaser
®
CX11NF is set to receive distinctive
ring pattern telephone calls. This may prevent the AcuLaser CX11NF
from receiving incoming faxes.
If your AcuLaser CX11NF does not pick up a telephone or fax call,
follow these steps to change the DRPD (Distinctive Ring Pattern
Detection) setting:
1. Press
the
Setup
button.
The Setup light turns on and the LCD screen displays Setup
Mode for a few seconds, and then changes to the Setup menu.
2. Press the
d
button twice to select
Fax Settings
. Then press the
r
button.
3. Press the
d
button twice to select
Reception Settings
. Then
press the
r
button.
4. Press the
d
button three times to select
DRPD
. Then press the
r
button.
5. Press the
u
button to select
ALL
. Then press the
r
button.
DRPD is set to
ALL
.
6. Press t
he
Setup
button to exit the menu.
Your telephone company can add a second telephone number to your
main telephone line that will ring with a distinctive pattern. DRPD
allows the AcuLaser CX11NF to distinguish between different ring
patterns. When DRPD is set to
NORMAL
, the AcuLaser CX11NF
will only answer the distinctive ring and ignore the one regular ring.
© 2005 Epson America, Inc. 7/05
CPD-20347
Printed in USA