Euro-Pro Ninja Pro System 1100 - Manual (Page 7)

12 TOLL FREE: 1-800-798-7398 www.ninjakitchen.com 13
English
Using the Bowl
USING THE DOUGH BLADE
IMPORTANT: Use only ‘DOUGH’ button
when using this attachment.
IMPORTANT: Accessories are not
interchangeable.
IMPORTANT: DO NOT attempt to
operate the appliance without the lid on.
1 Holding the dough blade by the shaft,
place it onto the gear shaft inside the
container. Ensure that the attachment
fits snuggly around the gear shaft and
that it is standing straight.
2 Add the ingredients and secure the bowl
lid onto the bowl. ( Fig. 11)
3 Plug the power cord into the electrical
outlet and press on the power button ( ).
NOTE: Please refer to ‘Speed Settings &
Uses’ chart for suggested uses.
USING THE 4-BLADE ASSEMBLY
IMPORTANT: Accessories are not
interchangeable.
CAUTION: Blades are sharp! Use extreme
caution when handling the blade
assemblies. Always hold them by the
shaft.
IMPORTANT: DO NOT attempt to
operate the appliance without the lid on.
1 Holding the 4-Blade assembly by
the shaft, place it onto the gear shaft
inside the container. Ensure that the
attachment fits snuggly around the gear
shaft and that it is standing straight.
2 Add the ingredients and secure the bowl
lid onto the bowl. ( Fig. 10)
3 Plug the power cord into the electrical
outlet and press on the power button ( ).
NOTE: Please refer to ‘Speed Settings
& Uses’ chart for suggested uses and
speeds.
Fig. 10 Fig. 12 Fig. 11
HOW TO CLEAN
CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid. Clean
with a damp sponge or cloth and wipe
dry.
1 The pitcher, bowl, lids and
attachments are all dishwasher safe.
It is recommended that the lids and
attachments be placed on the top rack.
2 You may also wash the containers by
filling ¾ of the container with warm water
and a drop of dish washing detergent,
placing the corresponding lid on the
container and pressing the pulse button
a few times. Once clean, remove the
container from the motor base. Rinse
the container, attachment and lid under
running water. Allow all the parts to dry
before storing.
Use extreme caution when handling the
blade assemblies as blades are very
sharp.
Please call customer service if any
servicing needs to be performed on the
appliance at 1-800-798-7398.
HOW TO STORE
1 Store the Ninja
™
Pro System 1100 upright
with the pitcher on the motor base,
6-Blade assembly inside the pitcher and
lid on the pitcher. Do not place anything
on top. Store the bowl with the 4-Blade
assembly inside and the lid on top along
with the appliance and the rest of the
attachments.
2 Tuck power cord in cord storage
compartment in the back of the motor
base.
Care & Maintenance
USING THE DOUGH PADDLE
IMPORTANT: Use only ‘DOUGH’ button
when using this attachment.
IMPORTANT: Accessories are not
interchangeable.
IMPORTANT: DO NOT attempt to
operate the appliance without the lid on.
1 Holding the dough paddle by the shaft,
place it onto the gear shaft inside the
container. Ensure that the attachment
fits snuggly around the gear shaft and
that it is standing straight.
2 Add the ingredients and secure the bowl
lid onto the bowl. ( Fig. 12)
3 Plug the power cord into the electrical
outlet and press on the power button ( ).
NOTE: Please refer to ‘Speed Settings &
Uses’ chart for suggested uses.
NJ602W_30_IB_ENG_100426.indd 12-13 10-05-03 11:38 AM