beautypg.com

13 administrator – EverFocus EVS110 User Manual

Page 28

background image

IP99 series

27

Diagram 3.13 PTZ settings


Since IP address is the only fixed one, therefore PTZ address is set as “1”. Protocols
are Pelco-D and Pelco-P which are in common use.
Note: When using Everfocus speed dome, user only needs to set the protocol as
AUTO in order to control the speed dome.

3.13 Administrator

Add user, set user’s right, set maximum number of simultaneous viewers and change
camera name, as shown in diagram 3.14:

This manual is related to the following products: