EverFocus EVS110 - Manual (Page 11)

IP99 series
10
2.1 Add more videos
If you wish to add one video display in the same web page, click “Add New” button,
as shown in diagram 2.2:
Diagram 2.2 Add video display
2.2 Change video resource
You can change video resource and simultaneously view multiplies cameras
and encoders at same time.
Right click mouse on display center point and go to “Change Resource”.
Then you would see the login page. Enter IP address, user name, password for the
camera you want to add. Default username is admin, NO password. Now you can add
more cameras. See Diagram 2.3
Diagram 2.3 Change video resource