Installation, Connecting the ductwork, Replacing the bottom trim – Electrolux E40PV100FS User Manual
Page 7

Installation
CONNECTING THE DUCTWORK
1 Use 8” round metal duct to connect the discharge collar on the hood to
the ductwork above.
2 Use duct tape to make all joints secure and air tight.
3 Remove the two temporary retaining screws from the lower flue and set
it in place on the hood.
4 Secure decorative flue to hood with two mounting screws (3.9 x 9.5mm).
pan head mounting screws.
LOWER
FLUE
RETAINING
SCREWS
8” ROUND
METAL
DUCT
MOUNTING
SCREWWS
(3.9 x 9.5 mm)
Figure 15
Figure 14
REPLACING THE BOTTOM TRIM
1 Remove the four (4) screws from the inside of the hood.
2 Remove the trim by pulling downward.
3 Slide the new trim upward into hood.
4 Replace the four screws inside hood.
Figure 16
See also other documents in the category Electrolux Fans:
- EFC 650-950-600-900 (80 pages)
- EFC 6441 (24 pages)
- CHDI 8610 (20 pages)
- E30DD75ESS (3 pages)
- DL 4150 (20 pages)
- EFT60002 (12 pages)
- RH30WC60G (4 pages)
- RH30WC60GSA (4 pages)
- RH42PC60GSA (4 pages)
- 5995438602 (18 pages)
- DK 9660-9690 (24 pages)
- FM 2500DD-A (40 pages)
- Cooker Hoods (7 pages)
- ICON RHDFW60GS (2 pages)
- KLWV610GEM (2 pages)
- BVM200 (8 pages)
- CH 710 (20 pages)
- HD 8820 (18 pages)
- ERCE9020AS (7 pages)
- EFT 615 (16 pages)
- RH30WC55G (4 pages)
- EFT925 (12 pages)
- EI36HI55KS (52 pages)
- FRIGIDAIRE F30WC19E (4 pages)
- EFG 530 (16 pages)
- EFP 60202 (76 pages)
- U24211 EFT 535 (15 pages)
- EFP 60520 (24 pages)
- F30WC (8 pages)
- ICON E30DD75ESS (4 pages)
- MCH 660 (16 pages)
- DEFI UK EFC 639 X (14 pages)
- ICON E488WV120S (2 pages)
- CHDD 8795 (18 pages)
- E488WV12OS (14 pages)
- HD 8990 (20 pages)
- RH30WC40GSA (4 pages)
- EFC 630 (20 pages)
- WALL-MOUNT E36WV60EPS (2 pages)
- Vent Hood E36WV60EPS (18 pages)
- D 8360 (20 pages)
- U31180 EFC 9673 (80 pages)
- EFG 540 (12 pages)
- 20 GN (3 pages)
- CH 1200-900-600 (12 pages)