Envision Peripherals EN9110 - Manual (Page 15)

EN9110
14
Below describes the function of each OSD icon.
1.
Contrast Adjust the picture contrast.
2.
Brightness Adjust the picture brightness.
3. Input Selected
Input Signal source selected ( select Analog
or Digital input source )
4. Focus
Adjust picture Focus (available in Analog
mode only).
5. Clock
Adjust picture Clock (available in Analog
mode only).
6. H- Position
Adjust the horizontal position of the picture
(availab in Analog mode only).
7. V- Position
Adjust the vertical position of the picture
(available in Analog mode only).
8. Language Multi-Language selection
9. Scaling Mode
Stretch the picture to fit full screen, screen
size ratio or native size (this function only
works when the resolution setting is lower
than the native resolution of 1280x1024).
10.
Red
Adjusts Red intensity.
11.
Green Adjusts
Green intensity.
12.
Blue Adjusts Blue intensity.
13.
C1
(6500K)Color
The color temperature for 6500°K is
x=0.313, y=0.329.
14.
C2
(7800K)Color
The color temperature for 7800°K is
x=0.296, y=0.311.
15. Reset
Clear old settings of Auto-configuration, re-
activates auto-configuration and set the
color temperature to 7800°K.
16. Exit Save user adjustment and exit OSD menu.
ADJUSTING THE PICTURE