Euro-Pro STEAM GENERATOR IRON EP8001 User Manual

Page 3

Even if you have used a steam generator iron before, please read all instructions and safeguards
in the Use and Care Instruction Book. In addition, please note the following user tips:

USING STEAM

PLEASE NOTE

: Steam performance improves after the first 6-8 hours of usage. The steam

power increases and initial condensation at maximum temperature is reduced.

1. Make sure the temperature setting of the iron is within the steam range on the temperature

selector.

2. Turn power on for iron and steam generator. Before starting to use steam, make sure the

Steam Ready Light (2) is “ON”, indicating that steam is available.

NOTE:

Trying to use steam before the Steam Ready Light (2) is “ON” can cause water
drops in the stem coming out of the iron.

CLEARING THE INITIAL CONDENSATION:

3. Clear the initial condensation by pressing the Steam Button (C) up to 3 seconds. Repeat if

necessary.

IMPORTANT NOTE:

4. While using the ironing system, if steam has not been released for more than

approximately 5 minutes, the hose has cooled and any steam remaining in the hose from
the last use might condense. Clear this condensation by pressing Steam Button (C) before
proceeding to use the iron.