beautypg.com

Setting and starting a programme, Interrupt a programme, Cancel a programme – Electrolux L 75478 FL User Manual

Page 15: Change a function, Set the delay start

background image

4. To use liquid detergent, turn the

flap down.

With the flap in the position
DOWN:
– Do not use gelatinous or thick

liquid detergents.

– Do not put more liquid deter-

gent than the limit showed in
the flap.

– Do not set the prewash

phase.

– Do not set the delay start

function.

5. Measure out the detergent and the

fabric conditioner.

6. Carefully close the detergent dis-

penser. Make sure that the flap
does not cause a blockage when
you close the drawer.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The re-

lated programme indicator comes
on.

2. The indicator of button

4

flashes

with red colour.

3. The display shows the default tem-

perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.

4. Set the available functions. The indi-

cator of the set function comes on
or the display shows the related
symbol.

5. Press button

4

to start the pro-

gramme. The indicator of button

4

is on.

INTERRUPT A PROGRAMME

1. Press button

4

. The indicator

flashes.

2. Press button

4

again. The washing

programme continues.

CANCEL A PROGRAMME

1. Press button

1

to cancel the pro-

gramme and to deactivate the ap-
pliance.

2. Press button

1

again to activate

the appliance. Now, you can set a
new washing programme.

The appliance does not drain
the water.

CHANGE A FUNCTION

You can change only some functions
before they operate.
1. Press button

4

. The indicator

flashes.

2. Change the function set.

SET THE DELAY START

1. Press button

5

again and again

until the display shows the number
of minutes or hours. The related
symbols comes on.

ENGLISH

15

This manual is related to the following products: