Epson 2000P - Manual (Page 14)

R4C624Setup Guide
Rev_C
A5 size SETUP.FM
6/15/00 Pass 0
L Proof Sign-off:
M.Otsuka, CRE M.Moriyama_______
N.Nomoto
_______
_______
Checking the Printer
Before printing your first page, you need to make sure the printer is
working correctly by printing a nozzle check page and, if necessary,
cleaning the print head.
Loading paper
Follow these steps to load plain paper in the printer.
1. Lower the output tray and slide out the extension. Next, slide the
left edge guide so that the distance between the edge guides is
slightly wider than the width of your paper.
2. Fan a stack of paper, then tap it on a flat surface to even the edges.
3. Load the stack of paper with the printable side up and the right edge
of the paper resting against the right side of the sheet feeder. Then
slide the left edge guide against the left edge of the paper.
Note:
❏ Always load paper into the sheet feeder short edge first.
❏ Make sure the paper stack fits under the arrow mark inside the edge
guide.
edge guide
output tray
printable
side up