Enterasys Networks 5H102-48 - Manual (Page 37)

Using LANVIEW
Troubleshooting 4-3
Table 4-1 LANVIEW LEDs
LED Color State Recommended Action
CPU Off Power off. Ensure chassis has adequate power.
Red Solid. Hardware failure
has occurred. If the LED remains red for several
minutes, contact Enterasys Networks for
technical support.
Amber Blinking. Image is being
loaded from Flash. None.
Solid. Boot PROM
diagnostics are running. If the LED remains amber for more than
several minutes, contact Enterasys
Networks for technical support.
Green Solid. Unit is functional. None.
Amber
and
Green Booting. Blinks amber
and green while image is
loading. None.
RX
(Receive) Off No link. No activity or
port in standby. Port
enabled or disabled. None.
Green Solid. Link, port enabled,
no activity. None.
Blinking. Link, port
disabled. None.
Amber Flashing. Link, port
enabled, activity. None.
Red Solid. Diagnostic failure. Contact Enterasys Networks for
assistance.