Ericsson DIALOG 4220 - Manual (Page 73)

73 Dialog 4220 Lite/Dialog 4222 Office
Settings
Programming of ring signals
You have 6 programmable ring signals on your phone. The different
signals can be programmed on lines, additional lines and multiple
represented lines. Ô
Program Press. Ô
Line 1 Press the corresponding Line key.
On the 4222 Office phone, a digit (0–6) is shown in the display.
(
0
–
6
) Select the ring signal you want to use according to the list
below.
0 = Silent.
1 = Periodic ring signal.
2 = Delayed periodic ring signal.
3 = One muted ring signal.
4 = One muted delayed ring signal.
5 = Immediate Speech Connection with one ring signal
controlled by function key.
6 = Immediate Speech Connection with one ring signal.
Note: Options 5 and 6 are not available for multiple
represented lines. Х Ф
Line 1 Press.
Х Ф
Program Press to finish programming.
To verify a ring signal
(Dialog 4222 Office phone only). Ô
Program Press.
Ô
Line 1 Press the corresponding Line key.
A digit (0–6) is shown in the display. Х Ф
Program Press to finish programming.