beautypg.com

Stacked laundry installations, Unit dimensions – Eurotech Appliances EWF272EL User Manual

Page 26

background image

26

Specifications are subject to change without notice. See owner’s manual for additional details.

EWF150 WASHER AND EDC158 DRYER

WARNING!

Never stack a washer on top of a dryer!
Secure the dryer to the top of the washer with the stacking kit designed specifically for

these appliances. (See page 10.)
These appliances must be properly grounded. Refer to the owner’s manual for instructions.
Installation should be carried out by a qualified person who is familiar with all local codes and

ordinances for electrical and plumbing connections. Incorrect installation may cause damage and/or

injury. Second-floor (above grade) installations must meet all local building codes.
When placing the stacked pair next to a wall or cabinet, be sure to leave 1/2” (12 mm) of space

between the units and the wall or cabinet.
The washer drain outlet should be positioned at a height between 23” (584 mm) and 35” (889 mm)

from the bottom of the unit. If possible you should also install the dryer so the condensed water flows

into the drain. Refer to the owner’s manual for instructions.
The door hinges on the condenser dryer can be reversed to make loading and unloading the dryer more

convenient. Refer to the owner’s manual for instructions.

Unit Dimensions

Stacked Laundry Installations

23-3/8

594 mm

66-1/2" 1689 mm

45-1/8"

1146 mm

22-3/8"

568 mm

36-7/8"

937 mm

21-3/8"

543 mm