Changing the filter, Replacing the water filter, More about your advanced water filter – Electrolux 241540105 (0612) User Manual
Page 29
29
Changing The Filter
REPLACING THE WATER FILTER
In general, you should change the water filter every six to nine months to ensure
highest possible water quality. The Filter Status light on the dispenser control
panel (see page 22) prompts you to replace the filter after a standard amount of
water (400 gallons for pure advantage
TM
and 250 gallons for pure advantage
plus
)
has flowed through the system.
If your refrigerator has not been used for a period of time (during moving for
example), change the filter before reinstalling the refrigerator.
More About Your Advanced Water Filter
The pure advantage
TM
and pure advantage
plus
ice and water filter
systems are tested and certified by NSF International, the nationally
respected, not-for-profit certification organization for public health
safety. The pure advantage
TM
and pure advantage
plus
filter systems
are tested and certified to ANSI/NSF Standards 42 and 53
for the
reduction of claims specified on the performance data sheet.
This system should not be used on water that is microbiologically unsafe or with
water of unknown quality unless the water has been adequately disinfected before
or after traveling through the filtration system.
NSF Test & Certification Results:
• Rated Capacity - 400 gallons for pure advantage
TM
and 250 gallons for pure
advantage
plus
• Rated service flow - .5 gallons per minute
• Maximum Rated Pressure - 100 pounds per square inch
• Maximum Operating Temp. - 100° F
NO
NO
NO
NO
NOTE
TE
TE
TE
TE
The pure advantage
TM
ice and water system can operate without filtration if you use a bypass
in place of the water filter cartridge. Please contact the Electrolux Customer Care Center at
1-877-435-3287 or visit our web site at www.electroluxusa.com to order the bypass (Part No.
240396701). The bypass does not work for pure advantage
plus
systems.