Thrustmaster T128 Racing Wheel and Pedal Set for Xbox Series X/S & PC - Manual (Page 11)

10/24
INSTALLATION ON XBOX CONSOLES
1. Connect the T2PM pedal set to the RJ12 connector (23) of the base.
2. Plug the power cable and power adapter into an electrical outlet.
3. Connect the USB-C cable (17) to the USB-C port (21) of the base.
4. Connect the USB-C/USB-A cable (16) to the USB-C cable (17) and to a USB-A port on the Xbox
console.
Once the console is powered on, your racing wheel will self-calibrate automatically and the power LED
(10) will light up.
You are now ready to play!