Epson QX-10 - Manual (Page 11)

PLUGGING IN
KEYBOARD CABLE
Some people like to use the QX-10 with the keyboard on their
laps and others like to set it on a firm surface, but your options
don’t end there. You can also adjust the angle of the keyboard.
Changing the angle of the keyboard is simple. First, turn it over.
Embedded in the upper corners on the bottom of the keyboard
are two legs. You can adjust these so that the keyboard tilts. Reach
under the lip near the arrow marked PULL, and lift the leg up-
ward until it locks in place. This tilts the keyboard at its highest
angle.
7