Emerson EWD2202 - Manual (Page 19)

PICTURE SEARCH
If you want to skip or repeat a scene during playback,
press the F.FWD or the REW button.
¡ Press it again and the DVD/VCR will now search at
super high speed. (in the LP/SLP modes only).
INDEX SEARCH
The index signal is recorded on the tape automatically
when the recording is started. If you want to view a
recording at a specific start point, this can be done easily.
1 Press the SEARCH MODE button so that the
Index Search menu appears.
2 Enter your desired number by pressing the
PLAY or the STOP button
within 30 seconds.
3 Press the F.FWD or the REW button to start
index search.
¡ If you want to go in the forward direction, press the
F.FWD button. If you want to go in the reverse
direction, press the REW button.
¡ After index search, the DVD/VCR will play the tape
automatically.
TIME SEARCH
This feature allows you to fast forward or rewind the
tape for the desired length of time.
1 Press the SEARCH MODE button twice so
that the Time Search menu appears.
2 Enter your desired time to
skip by pressing the PLAY
or the STOP button within
30 seconds.
3 Press the F.FWD or the REW button to start
time search.
¡ If you want to go in the forward direction, press the
F.FWD button.
¡ If you want to go in the reverse direction, press the
REW button.
¡ After time search, the DVD/VCR will play the tape
automatically.
VCR
– 19 – EN
1L25
PLAYBACK FUNCTION
NORMAL PLAYBACK
1 Insert a prerecorded tape. The DVD/VCR will
turn on, and the VCR/TV Light
and the CST IN Light comes
on.
¡ If the safety tab has been removed, the DVD/VCR
will start playback automatically.
2 Turn on the TV and set the TV to channel 3 or 4.
¡ Now set the CH3/CH4 switch on the back of the
DVD/VCR to match the channel selected on the TV.
3 Begin playback by pressing the PLAY button.
¡ Tracking adjustment will be done automatically
(Digital Tracking function) when you start playback.
To adjust the tracking manually, press the CHAN-
NEL(o/p) buttons on the DVD/VCR.
¡ When a tape has reached the end, the DVD/VCR
will automatically rewind the tape to the beginning,
and eject the tape.
¡ S-VHS Quasi Playback (SQPB): This unit allows
you to view a tape recorded in S-VHS format.
(Noise lines may appear on the picture.)
4 To stop playback, press the STOP button.
VCR
PAUSE/SLOW
You can freeze the picture on TV screen by pressing
the PAUSE button during playback.
¡ You can advance the picture by one frame at a time
by pressing the PAUSE button during the Still mode.
¡ If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing the
CHANNEL(o/p) buttons.
¡ If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if so equipped.
You can watch in the slow motion by pressing the
SLOW button during playback or the still mode.
¡ If a noise bar appears on the TV screen, you can
reduce it by pressing the CHANNEL(o/p) buttons.
¡ After the DVD/VCR has been in Still/Slow mode for
5 minutes, it will stop automatically to protect the
tape and the video head from damage.
¡ To return to playback, press the PLAY button.
AUTO REPEAT PLAYBACK
This feature allows you to play a tape over and over.
1 Select main menu by pressing the MENU
button.
VCR
SEARCH FUNCTIONS
2 Select "AUTO REPEAT" by pressing the
PLAY or the STOP button.
3 Begin auto repeat playback by pressing the
F.FWD button so that [ON] appears next to
"AUTO REPEAT".
¡ If the on-screen menu still remains, press the
CLEAR/C.RESET button to exit the menu.
¡ To cancel the Auto repeat mode, press the F.FWD button at
step [3] so that [OFF] appears next to "AUTO REPEAT".
TIME SEARCH
2 : 50
INDEX SEARCH
03