Evolution Technologies 222 - Manual (Page 40)

40
RS-232 Control
This function enables you to change the link transmit status of the Evolution 222.
The options are LINK TRANSMIT, LINK RECEIVE.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select: RS-232 CONTROL.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control . The front panel display (3) shows the default mode: LINK
TRANSMIT .
3. Use the level control knob or the up and down keys to select the desired
option: LINK TRANSMIT, or LINK RECEIVE.
4. Press the enter button or key to confirm the selection. The front panel display
reads: RS-232 CONTROL.
Save
This function enables you to save a copy of the current settings. The options are:
GO, BACK.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select: SAVE.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control. The front panel display (3) shows the default mode: GO.
3. Press the enter button or key to save the settings The front panel display
reads: SAVE.
GO
Saves a copy of current settings to memory, overwriting previously saved settings.
(SECTION SEVEN: Customizing the Evolution 222 continued)
5 Menu Button or Key
Enter or exit the menu.
14 Volume Knob
or Level Keys
Navigate the menu hierarchy;
review functions and configu-
ration options.
6 Enter Button or Key
Select a configuration option;
confirm a selection.
BACK
Scroll backwards through the
menu hierarchy; exit a menu
option without confirming it.