Evolution Technologies 222 - Manual (Page 33)

33
continued
Info
This function enables you to access information about the preamplifier software,
EEPROM, and PC Boards. The PC Boards are listed in the left margin, on this
page.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select: INFO.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control . The front panel display (3) shows the software version num-
ber.
3. Rotate the level control knob clockwise or press the up key. The front panel
display shows the EEPROM version number.
4. Rotate the level control knob clockwise or press the up key again. The front
panel display shows the PC board version number.
5. Press the enter button or key. Use the level control knob or the up and down
keys to scroll through the version numbers of PC boards, from the PC Boards
listed at left.
EEPROM
Electrically erasable programmable read-only memory. An erasable memory chip
used in the Evolution 222 to store menu selection information.
PC Boards
CONTROL
DISPLAY
ENCODER
MAIN L
MAIN R
POWER CONN
POWER SUPP
DIG CONN