Selecting the media playback mode, Playing audio cds – Denon DN-500CB CD/USB/Bluetooth Player with Remote User Manual
Page 9
9
Selecting the Media Playback Mode
To select what kind of media you want to play:
To cycle through the available options, press the
CD
/
AUX/USB/BT
button.
•
CD:
audio CD, CD-DA, CD-ROM, WAV, MP3, or CD with audio files (
CDR
) (see
Playing Audio CDs
)
•
Aux:
device connected to
Aux In
(see
Playing Audio from an External Device
)
•
USB:
USB device (mass storage class) (see
Playing Audio Files on a USB Flash Drive
)
•
Bluetooth:
Bluetooth device (see
Playing Audio from a Bluetooth Device
)
Playing Audio CDs
To play audio CDs:
1.
If the unit is off, press the
Power
button to power it on.
Important:
Do not insert a CD when the power is off. Doing so may damage the unit.
2.
Insert a CD into the
CD slot
. (Hold the edges of the CD without touching the recorded surface. Be careful not to
trap your fingers when the disc is drawn into the unit.)
3.
Select
CD
as the media type (described in
Selecting the Media Playback Mode
).
The CD will start playing automatically when Power-On Play mode is active.
In CD Mode, you can perform any of the following operations:
•
To start, resume, or pause playback,
press the
Play
/
Pause
button.
•
To stop playback,
press the
Stop
button.
•
To rewind or fast-forward through the track,
press and hold one of the
Search
buttons. The track will
rewind/fast-forward at
5
times the normal playback speed. To resume playback, release the button.
•
To skip directly to a track:
1.
If in Pause, Stop, or Play mode, press one of the
Number
buttons
(
0
–
9
) to enter the desired track number. If
the track number is two digits, press the buttons in succession (e.g.,
1
then
2
for Track 12). Alternatively, turn
the
Jog Dial
to select a track and press the
Jog Dial
to load the track.
2.
If the previous track was playing, playback will automatically begin once a new track is selected. If the track
was paused or stopped, press the
Play/Pause
button to resume playback.
•
To select a Repeat Playback mode,
press the
Repeat
button. It will cycle through
One
(the same track will
repeat indefinitely),
Repeat All
(the list of all tracks will repeat indefinitely),
and
Repeat Off
(no tracks will
repeat).
•
To select the Play Mode,
press the
Random
button. It will cycle through
Random
(the list of all tracks will
play in a random order [for up to
256
tracks]), and
Single Play
(
) (the current track will play until its end and
then stop.
•
To change the Time Mode in the display,
press the
Time
button. It will cycle through
Elapsed
(how much time
has elapsed of the current track),
Remaining
(how much time remains of the current track),
Total Elapsed Time
(how much time has elapsed of all remaining tracks), and
Total Remaining
(how much time remains of all
remaining tracks. This applies only to CDs.)
•
To eject a CD,
press the
Eject
button
when the unit is stopped or paused.
Ejecting
will appear in the
display
while ejecting the CD.
No Disc
will appear when there is no disc in the
CD slot
.
Important:
When powering on the unit, hold the Eject button to engage Force Eject Mode.