Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 69)

IQOYA SERV/LINK user manual
69
Click on the icon to steam the program to an additional IP destination.
Click on “Save” to confirm the settings. Click on “Save & New” to confirm the settings and create a new IP service
with the same parameters.
Click on “Close” to discard the settings
Encapsulation = None and Transport protocol = HTTP
Audio stream: Payload size Read/Write Size (in ms) of the audio transported by an RTP frame.
For unframed formats (like PCM, G7xx, apt-X), payload size value is rounded to the nearest
multiple value that is equal or higher than the processing granularity value.
For framed formats (like MPEG, AAC), payload size value is rounded to the nearest multiple
value equal or higher than the frame size.
Parameter Type Description
Program
Name Read/Write Select the Program to be streamed from the list of Programs. A Program can be used by several
IP services.
Data tunneling (This section is displayed only if tunneling has been activated from Preferences->Auxiliary data->GPIO)
Auxiliary data Read/Write This is the input port to be selected for collecting the dynamic metadata to be inserted in the
icecast/shoutcast stream. It can be a serial port (if the hardware option for RS232 ports is
installed), or an input UDP port declared from Preferences->Auxiliary data->UDP.
Audio stream