Digigram Software for IQOYA SERV/LINK 88 (Upgrades from 8 Codecs to 16) - Manual (Page 12)

IQOYA SERV/LINK user manual
1.6 IQOYA SERV/LINK with AES67 and MADI connectivity
● from 8/8 up to 64/64 mono I/O channels on AES67 & MADI, for SERV/LINK88-AES67/MADI
● from 72/72 up to 128/128 mono I/O channels on AES67 & MADI, for SERV/LINK7272-AES67/MADI
● Synchronization on PTP, WordClock, MADI
● 2 Gbit/s R-J45 dedicated to AES67 (64 mono channels),
or 4 Gbit/s R-J45 dedicated to AES67 (128 mono channels),
● 2 x RJ45 10/100/1000 Mbits/s Ethernet ports for WAN
1.7 IQOYA SERV/LINK with DANTE connectivity
● from 8/8 up to 128/128 mono I/O channels on DANTE
● Synchronization on PTP
● 2 Gbit/s R-J45 dedicated to DANTE (64 mono channels), Primary port and Secondary port
● 2 x RJ45 10/100/1000 Mbits/s Ethernet ports for WAN
1.8 IQOYA SERV/LINK for transcoding only
● from 8/8 up to 128/128 mono channels for internal busses.
● 2 x RJ45 10/100/1000 Mbits/s Ethernet ports
2 KEY SOFTWARE FEATURES
2.1 Standard features
Two modes of use: “Program Distribution” mode and “Remote Broadcasting” mode.
Distribution mode
● Simultaneous encoding, decoding, transcoding
● Multi-format encoding and multi-protocol streaming of each input.
● Streaming protocols: ARTP, UDP, Icecast/Shoutcast, HLS multi-bitrate
● Support of unicast, multi-unicast, multicast, multi-multicast addressing
● Support of IGMPv3
● MPEG-TS/IP SPTS and MPTS streaming (encoding), with DVB information tables.
● VLAN Tagging + DSCP
● IP Bonding on Eth interfaces: mode 1 (active-backup) and mode 4 (802.3ad passive mode) (distribution
mode)
● Support of DHCP
● Asymmetric algorithmic encoding/decoding
● 3 decoding priorities
● Automatic switching to a lower decoding priority in case of upper priority failure
● 3 decoding priorities per output program, with choice of the audio source on each priority: IP service (RTP,
UDP, HTTP), file, playlist and Audio input
12