Akg DMM8 ULD Digital Automatic Microphone Mixer with LAN and DANTE Interface - Manual (Page 120)

operAting the Device
DMM8 MANUAL 120
Step Description
2 Press the rotary knob for the corresponding input or output for
between 8 and 10 seconds
• An acoustic signal (beep) is sounded.
3 Release the rotary knob after the beep
• The device preset is deleted and cannot be selected (emp-
ty storage location, LED 1 lit).
8.8 Using MUTE
8.8.1 Activating MUTE
Inputs and outputs can be switched to MUTE . Proceed as follows:
Step Description
1 In the LEVEL function, briefly press the rotary knob for the
corresponding input or output.
• The corresponding channel is muted.
• All LEDs previously lit will flash.
• The current volume is stored.
The MUTE function cannot be used for the HEADPHONE rotary knob!
8.8.2 Deactivating MUTE
To deactivate the MUTE function proceed as follows:
MUTE