Ericsson LZT-1872R1A User Manual

Page 20

The user is alerted to the presence of missed

individual calls via one of two methods. The default
first method is for the radio to display "C*" as the first
two characters in the display. The alternate method
allows the user to PC program an eight character
alphanumeric such as "*MSG*". In combination with
these notification methods, the personality can be
set-up so that the radio beeps until the user clears the
call or toggles the hookswitch.

Storing An Individual Call ID

This type of call is dynamically stored to the

call list by following the following steps:

Enter the desired individual call ID then

# followed by the

T key.

Enter the two digit storage location for

the number (00 to 50). The new
individual call ID is now added to the
call list.

Using Special Call Lists

In the Allegra Duplex Portable, the difference

between a "Call List" and "Special Call List" is that the
Call List consists of user modifiable phone numbers
and radio LIDs. It operates similarly to a pre-stored

phone list in a cellular phone. A "Special Call List" is
PC programmable and is not user modifiable.

Storing A Telephone Number To The Call List

The number of dial locations (10, 20, 30, 40, or

50) available is set through radio programming. The
maximum number of digits stored in any location is
14. The user may dynamically add phone numbers to
the call list by following these steps:

Enter the phone number, then

followed by

Enter the two digit storage location for

the number (00 to 50).

The new phone number is now added to the

call list at the specified location.

Recalling calls from the call list

Each pre-stored call number has a

corresponding phone number. To dial the phone
number, select the 2 digit call number and press
R. Alternately, the user can scroll through the

call

list using the

R key to scroll forward through the

list.

Simplex Operation