Ericsson LZT-1872R1A User Manual

Page 18

If the radio is programmed for a non-split

display then the selected talk group is displayed when

the radio is idling. The first time the

* key is

pressed the radio displays the selected system name.
This name remains on the display for the

programmed display time-out period. If the

* is

released and then pressed again during this time the
radio ramps to the next system name in the list.

If the radio is programmed for a split display

then both the selected system and group are
displayed when the radio is idling. The first time the
* key is pressed the radio ramps to the next
system name in the list.

The ramp direction through the system name

list is selectable. It is toggled by pressing the

key.

System Selection-Direct Number Entry

Direct system selection can be made by

entering (1) the system selection digit(s), (2) pressing
F, (3) pressing

If an invalid number is

entered, the first system is selected.

Group Selection-Ramping Names

The desired group is selected by pressing and

releasing

#. The ramp direction of the group

selection is changed by pressing

F and then #.

Group Selection-Direct Number Entry

Direct group selection can be made by entering

(1) the group selection digit(s), (2) pressing

F, (3)

pressing

If an invalid group number is entered,

the first group is selected.

Unlocking The Radio

After the portable is locked the user can unlock

the portable by keying in the lock code. If an
incorrect digit is entered simply start over with the
correct code. If the lock code is forgotten, contact the
system operator.

Locking The Radio

The radio can be locked by pressing

followed by

7. The ▲

▲ icon is displayed. In this

mode calls cannot be originated. This feature is
operational only if a lock code is entered during radio
programming. Lock codes can be 1 to 15 digits long.