Nap timer – Emerson Radio CK5052 User Manual
Page 13
12
NAP TIMER
This radio includes a programmable Nap Timer alarm. Use the Nap Timer to wake
up after a nap without disturbing your regular alarm settings. The Nap Timer can
be used for naps of up to 99 minutes.
To set the Nap Timer:
1.) Depress the NAP button. The display will show “n 30”, indicating a 30 minute
nap time, and the NAP indicator will light. After 30 minutes the buzzer alarm
will turn on.
2.) To adjust the length of the Nap Timer depress and hold the NAP button, and
repeatedly press either the FWD
or REV
buttons until the display shows
the desired Nap time. You can select between 1 minute and 99 minutes.
Note: When you change the length of the Nap Timer setting, the new setting
becomes the default setting. For example if you change the Nap Timer from
30 minutes to 45 minutes, the new default setting will become 45 minutes. The
next time you press the NAP button the Nap Timer will start at 45 minutes.
However if the power is interrupted and the back up battery is not installed, the
Nap Timer will return to the original 30-minute default setting.
3.) When the Nap Timer counts down to “00” the buzzer alarm will turn on. Press
the SNOOZE button to shut off the buzzer alarm.
Note: If you do not press the SNOOZE button to shut the buzzer off, it will
continue for one hour and then shut off automatically.
To cancel the Nap Timer before the buzzer alarm turns on, press the SNOOZE
button at any time. The NAP indicator goes off and the buzzer alarm will not turn
on.
AM indicator
NAP indicator
CK5052_ib041503.p65
15/4/2003, 10:30
12