Philips X-Line BDL3107X 55" Full HD Video Wall Display - Manual (Page 27)

55BDL3105X_55BDL3107X
16
4. Operation
NOTE : The control button described in this section is mainly
on the remote control unless specified otherwise.
4.1. Watch the Connected Video Source
See page 11 for external equipments connection.
1. Press
[ ] SOURCE button.
2. Press [ ] or [ ] button to choose a device, then press
[ ] button.
4.2. Change Picture Format
You can change the picture format to suit the video source.
Each video source has its available picture formats.
The available picture formats depend on the video source:
1. Press
[ ] FORMAT button.
2. Press [ ] or [ ] button to choose a picture format, then
press [ ] button.
• { Auto zoom }: Enlarge the picture to fill the screen.
It is recommended that you select Auto zoom
for minimal screen distortion. This option is not
recommended for HD display and PC.
• { Movie expand 16:9 }: Scale 4:3 format to 16:9. Not
recommended for HD or PC .
• { Wide screen }: Shows wide screen format content
unstretched. Not recommended for HD or PC .
• { Unscaled }: Provide maximum detail for PC . This
option is available only when PC mode is selected
from the
{Picture} menu.
• { 4:3 }: Display the classic 4:3 format.
• { Custom zoom }: Apply the customized zoom settings
selected from the sub-menu of Picture and edges .
4.3. Play multimedia files via Local Area
Network
To play files via Local Area Network, you will need:
• A wired home network, connected with a Universal Plug
and Play (uPnP) router.
• Optional: A LAN cable that connects your display to your
home network.
• A media server running on your computer.
• Appropriate settings on your computer firewall to allow
you to run the media server.
4.3.1. Network settings
1. Connect your display and the computer to the same
home network. Refer to the connection diagram as
shown below.
2. Switch your PC and router On.
• Single display setup:
PC
[RJ-45] [RJ-45] ROUTER
• Multiple display setup:
PC
[RJ-45] [RJ-45] [RJ-45]
ROUTER
DISPLAY 1 DISPLAY 2
NOTE : If the apparatus does not return to DLNA mode due
to external electrical disturbances (e.g. electrostatic
discharge), user intervention is required.
Set up media sharing
1. Install a media server on your computer to share media
files. These are some media servers:
• For
PC : Windows Media Player 11 (or higher) or
TVersity
• For Mac : Twonky
2. Switch on media sharing on your computer using the
media server. For more information on how to set up the
media server, refer to the website of the media server.
4.3.2. How to use DLNA-DMP
Ensure you have connected to the network.
You can press
button to display the connection of the
network.
Picture format
Picture style
Sound style
Smart power
Volume
Monitor group
Monitor ID
Model name
SWVersion
Serial no
Temperature
Network configuration
IP address
Netmask
Gateway
Network name
Ethernet MAC address
Wide screen
Standard
Personal
Off
0
1
1
xxxxxxxx
1.51
25°C
DHCP & Auto IP
192.168.1.116
255.255.255.0
192.168.1.1
xxxxxxxx
FF:FF:FF:FF:FF:FF:
HDMI 1 1080p60 26/09/2014 Friday 09:32:00