Philips X-Line BDL3107X 55" Full HD Video Wall Display - Manual (Page 26)

55BDL3105X_55BDL3107X
15
3.6. IR Pass-through Connection
DVD / VCR / VCD
(DVD / VCR / VCD)
Remote Control
FORMAT SOURCE
INFO LIST
OPTIONS ADJUST
VOL
NORMAL ID
ID SET ENTER
[IR OUT]
[IR IN]
3.7. Wire-connecting to Network
PC
[RJ-45]
[RJ-45]
ROUTER
INTERNET
Network Settings:
1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press
[ ] HOME button on the remote control, then select Setup .
4. Select Connect to network , then press [ ] button.
5. Wait until this display finds the network connection.
6. If the “End User License Agreement” window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.