Westcott FJ80 II M Universal Touchscreen 80Ws Speedlight with Adapter for Cameras - Manual (Page 7)

Updating Firmware
IMPORTANT
• If the FJ80 II doesn’t display as an external device after connecting to a computer,
disconnect the USB cable from both devices and restart the computer and firmware
update process.
• It’s recommended that the firmware update installation process be completed only
when the connected computer’s power level is ≥ 25%. Loss of power of any type during
this process could render the FJ80 II inoperable and require professional repair.
• Removing the USB cable from the FJ80 II without properly ejecting the device from
your computer could render the trigger inoperable and require professional repair.
• Copying the firmware from your computer to the FJ80 II may take a few minutes and/
or halt the copying process. Should this happen, close the copy progress window and
try again. Further copying issues may require the computer to be restarted.
The FJ80 II is designed with a USB-C port to allow for firmware
updates and charging. Future firmware updates may result in
performance enhancements and modified menu options.
The FJ80 II’s firmware version is displayed on the start-up screen.
Please visit fjwestcott.com/firmware to update your FJ80 II to the
latest firmware. Follow the instructions included with the firmware
download to update.