Westcott FJ80 II M Universal Touchscreen 80Ws Speedlight with Adapter for Cameras - Manual (Page 5)

Getting Started
Charging the FJ80 II Lithium Polymer Battery
1. Ensure the FJ80 II is OFF by long-pressing the Power button until the LCD screen turns off.
2. Remove the battery from the FJ80 II by pressing the two release buttons on the sides of the
battery and gently pull the battery away from the FJ80 II battery port.
3. Connect the USB-C Cord to the FJ80 II Battery Charger and plug the AC adapter into a wall outlet.
4. Align the metal contacts on the back of the FJ80 II battery with the contacts on the FJ80 II
charger; while pressing the buttons on the side of the battery, gently insert the battery into the
charger and gently press down until the battery locks into place.
5. The battery is charged and can be safely removed from the charger when all of the LED
indicator lights turns green.
6. Remove the battery from the charger by pressing the side release buttons and gently pulling
away from the charger.
Battery Charger LED Indicator Light Colors:
Green:
• No Battery Inserted : One indicator illuminated green means the charger is plugged into a power
outlet and ready to charge the FJ80 II Li-po Battery.
• Battery Inserted : The FJ80 II Battery is fully-charged and ready to be removed from the charger.
Orange:
• Battery Inserted : The FJ80 II Battery is correctly inserted and charging.
Attaching the Lithium Polymer Battery
Attach the FJ80 II Battery into the speedlight by aligning the metal contacts on the back of the
battery to the contacts on the FJ80 II battery port and gently press the battery into the port until it
clicks into place.
Powering On
1. Ensure the FJ80 II battery has been fully charged.
2. Ensure the battery is securely attached to the FJ80 II.
3. Turn the speedlight
ON by long-pressing the Power button, then tap the blue power logo on the
screen until the start-up screen appears.
Note: The FJ80 II LCD Touchscreen is protected by a removable clear screen protector that can be
removed at any time by gently pulling the film away from the display.