Emerson Radio HD7999 - Manual (Page 15)

14
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to play in any desired order.
NOTE: You can program a disc either during playback or in Stop mode.
1.) Press the PROGRAM button once. The
PROG indicator and the ‘0 0’ flashes in the
display.
2.) Press the or button to select the first
track to be programmed.
Example: Track # 02.
3.) When the desired track number is flashing in
the display press the PROGRAM button again
to enter the desired track number in Program
Number 1. The track number returns to “0 0”.
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the PLAY/PAUSE button to begin
programmed playback. The PROG indicator
remains in the display and the track display
stops flashing.
• Playback begins with the first track you programmed and continues until all
programmed tracks have been played, and then the player stops. The
programmed sequence will remain in the memory until the power shuts off
(approximately 30 seconds) or until the CD door is opened.
• If you press the PROG and PLAY/PAUSE buttons again before the power
shuts off the programmed sequence will play again.
PROG
PROG
PROG
PROG
HD7999_031004.p65 11/3/2004, 10:15 14