Nikon SB-5000 AF Speedlight - Manual (Page 66)

D-14
D
Wireless Multiple Flash-unit Photography
En-03
t
Pairing
• Execute pairing beforehand between devices that conduct
communication.
• Once the SB-5000 and the WR-R10 are paired, it is not necessary to pair
them again.
• To use multiple SB-5000 units, each unit must be paired with the
WR-R10.
• When another WR-R10 is attached to the camera, re-execute pairing
with it.
t
PIN code
• Set the same PIN code beforehand for devices that conduct
communication.
• To use multiple SB-5000 units, set the same PIN code for all SB-5000
units and the WR-R10. The PIN code of the WR-R10 can be set on the
camera.
• To increase the number of SB-5000 units, the link can be established
only by entering the same PIN code to all the units to be added.
• Even when another WR-R10 is attached to the camera, resetting the PIN
code is not necessary.