FujiFilm EF-X500 Flash - Manual (Page 63)

56
W
ir
eless F
lash Phot
og
raph
y
4
The Master Flash
Channel
Choose the optical wireless channel (1, 2, 3, or 4) used for
communication between the master and remote fl ash
units. Separate channels can be used for diff erent fl ash
systems or to prevent interference when multiple systems
are operating in close proximity; be sure the master fl ash
is set to the same channel as the units you wish to control.
1 Press the page button until the
page is displayed.
2 Press the j function button to
highlight the channel.
3 Rotate the command dial to
choose the desired option and
press
OK .