FujiFilm EF-X500 Flash - Manual (Page 36)

29
3
Single F
lash M
ode
Flash Control Mode
When the power switch is rotated to ON (single fl ash
mode), you can choose the fl ash control mode
from TTL, manual (
P
31), and repeating fl ash
(
P
33).
TTL Mode
In TTL mode (
P
20), automatic fl ash control is avail-
able when the camera is in mode P (program AE).
N
The fl ash display shows the approxi-
mate range when the camera shutter
button is pressed halfway.
m Flash Compensation
Although in TTL mode fl ash output is automatically ad-
justed for optimal exposure, you also have the option of
manually adjusting output up or down to make the sub-
ject brighter or darker. Choose from values between ±5 EV
in steps of 1⁄3 EV (note that depending on shooting condi-
tions, output may be less than selected if the limits of the
camera exposure metering system are reached).
1 Press the page button until the
page is displayed.