Pelco PXM200 Pedestal Mount for ExSite Enhanced Explosionproof Cameras - Manual (Page 4)

RELATED PRODUCTS
RECOMMENDED MOUNTS
AXM200 Adjustable mount for ExSite Enhanced Fixed
Models; enables manual pan/tilt adjustment
WXM200 Wall mount designed to mount the
ExSite Series system directly to a
load-bearing vertical surface
Note: Requires the use of AXM200 for all
ExSite Enhanced Fixed models.
PXM200 Pedestal mount designed to mount an ExSite
Enhanced Series system directly to a
horizontal surface in either an upright or
inverted position
Note: Requires the use of AXM200 for all
ExSite Enhanced Fixed models.
CMXM200 Corner adapter for use with the WXM200 to
mount an ExSite Series system to the corner
of a structure
PAXM200 Pole adapter for use with the WXM200 to
mount a system to a vertical pole or with a
PXM200 to mount a system to a horizontal
pole; recommended pole diameter is 10.16 to
22.86 cm (4 to 9 inches)
GENERAL
Construction
Mounts Electropolished 316L stainless steel
PAXM200 Mounting Straps 316L stainless steel
Maximum Load
WXM200 40.8 kg (90 lb)
CMXM200 40.8 kg (90 lb)
PAXM200 40.8 kg (90 lb)
PXM200 40.8 kg (90 lb)
AXM200 19.5 kg (43 lb)
Unit Weight
WXM200 5.7 kg (12.6 lb)
CMXM200 3.71 kg (8.2 lb)
PAXM200 4.17 kg (9.2 lb)
PXM200 0.86 kg (1.9 lb)
AXM200 4.84 kg (10.7 lb)
Shipping Weight (approximate)
WXM200 7.71 kg (17.0 lb)
CMXM200 5.89 kg (13.0 lb)
PAXM200 6.35 kg (14.0 lb)
PXM200 1.81 kg (4.0 lb)
AXM200 6.5 kg (14.3 lb)
Mounting Method
Recommended
Mounting Surface
Recommended Hardware
WXM200, CMXM200,
and PXM200 Solid concrete with recommended
strength of 3,600 psi or 25 Mpa Five 3/8-16 x 1-9/16-inch long stainless steel drop-in anchors and five 3/8-16 x 1.0-inch thread
length, stainless steel hex head bolts with stainless steel lock washers (not supplied)
Five M10x1.5x20mm, stainless steel socket head bolts with lock washers are supplied with the
CMXM200 and PAXM200 for use with the WXM200 wall mount or PXM200 pedestal mount.
Steel I beam with a minimum of 1/
8-inch wall Five 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with stainless steel lock washers
and 3/8-16 stainless steel nuts (not supplied)
PAXM200 Steel pole with a diameter of 4 to 9
inches (10.16 to 22.86 cm) Four 5/8-inch wide x 40-inch (101.6 cm) long stainless steel straps to attach the adapter to a pole
(supplied)
AXM200 Solid concrete with recommended
strength of 3,600 psi or 25 Mpa Industry standard 101.6 mm Bolt circle for use with M8 countersunk screws (not supplied).
Steel I beam with a minimum of 1/
8-inch wall Four M10x1.5 x 16 mm thread strength, stainless steel socket cap head bolts and lock washers are
supplied for use with WXM200 or PXM200.
WXM200 WALL MOUNT
37.97
(14.95)
30.66
(12.07)
14.57
(5.73)
20.32
(8.00)
Ш 1.10
(0.43)
Ш 1.10
(0.43)