Pelco PXM200 Pedestal Mount for ExSite Enhanced Explosionproof Cameras - Manual (Page 2)

TECHNICAL SPECIFICATIONS
Additional Features
• Integrated Wiper
• Sun Shroud, and Heater/Window Defroster
• Configurable On-Screen Displays
• 4 Alarm Inputs
• 2 Relay Outputs (1 is dedicated for the washer)
• Autofocus with Manual Override
• Auto Iris with Manual Override
• Dual cable entries for multiple data and power configurations
• Easily accessible internal microSD storage for local recording (ONVIF
Profile G)
• 1000Base-T / 100Base-T ethernet and SFP/FSFP connection
• SFP/FSFP modules to support fiber, ethernet-over-coax (EoC), or UTP
• Compatible with Third Party Explosionproof Wash Systems
• Manual 360° Pan and 180° Tilt Adjustments with optional accessory
mount
• Remote hard-reset capability allows for maintenance without physical
access to the camera
PELCO ANALYTICS BEHAVIORS
ExSite Enhanced includes nine user-configurable behaviors, with up to three
analytics behavior active at any one time.
•
Abandoned Object: Detects objects placed within a defined zone and
triggers an alarm if the object remains in the zone longer than the user-
defined time allows.
• Adaptive Motion Detection: Detects and tracks objects that enter a
scene and then triggers an alarm when the objects enter a user-defined
zone.
• Camera Sabotage: Detects contrast changes in the field of view. This
behavior triggers an alarm if the lens is obstructed by spray paint, a cloth,
or lens cap or if there is any unauthorized repositioning of the camera.
• Directional Motion: Generates an alarm when a person or object
moves in a specified direction over a user defined “trip wire” location.
This behavior is often used where personnel or vehicles are supposed to
enter or exit a scene going a specific direction; subjects coming from the
disallowed direction will trigger the analytic alarm.
• Loitering Detection: Identifies when people or vehicles remain in a
defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior in sensitive
areas.
• Object Counting: Counts the number of objects that enter or pass
through a user defined zone.
• Object Removal: Triggers an alarm if an object is removed from a
user-defined zone.
• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer
than the user-defined time allows.
SOFTWARE FEATURES
• Multilingual menus
• Password protection
• 32 window blanks, configurable in size
• Pelco analytics including eight user-configurable behaviors
• Smart Compression, reducing bandwidth consumption while still
providing high quality imaging
CAMERA/OPTICS
Sensor Type 1/2.8-inch Type Exmor CMOS Sensor
Optical Zoom 30X
Digital Zoom 12X
Maximum Resolution 1920 x 1080
Aspect Ratio 16:9
Lens f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~
129.0 mm (tele)
Horizontal Angle of View 63.7° wide - 2.3° tele
Light Sensitivity*
Color (33 ms) 0.03 lux
Color (250 ms) 0.008 lux
Mono (33 ms) 0.004 lux
Mono (250 ms) 0.001 lux
Day/Night Capabilities Yes
Shutter Range 1/1 ~ 1/10,000 sec
Signal-to-Noise Ratio >50dB
IR Cut Filter Yes
Wide Dynamic Range 130 db
Iris Control Auto iris with manual override
Backlight Compensation Yes
Automatic Gain Control Yes
Active Noise Filtering Yes; 3D Noise Filtering
Electronic Image
Stabilization (EIS)
Yes
*Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain
at 30 IRE (30% of signal level) with Sensitivity Boost OFF; 4X
improvement to sensitivity with Sensitivity Boost ON