Electrolux ESL 66010 - Manual (Page 24)

24 electrolux daily use
Activation/deactivation of the rinse
aid dispenser
1. Press the On/Off button. The
dishwasher must be in setting
mode.
2. Press simultaneously buttons 2
and 3, until the lights of buttons 1,
2
, and 3 start flashing.
3. Press button 2, the lights of
buttons 1 and 3 turn off while the
light of button 2 goes on flashing.
The digital display indicates the
current setting.
4. To change the setting, press
button 2 again, the digital display
indicates the new setting.
5. To memorise the operation, switch
off the dishwasher by pressing the
On/Off button.
If you decide to turn back to the
use of standard detergent system
we advise that you:
1. Deactivate the Multi-tab function.
2. Fill up the salt container and the
rinse aid dispenser again.
3. Adjust the water hardness setting
to the highest setting and perform
1 normal washing programme
without loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the
water in your area.
5. Adjust the rinse aid dosage.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
117989 83/0en 20-02-2007 17:34 Pagina 24