MACKIE MTest-1 Cable Tester - Manual (Page 3)

Owner
’s Manual
3
Owner’s Manual
Contents
Part No. SW1228 Rev. A 01/18
©2018 LOUD Audio, LLC All Rights Reserved.
Like us
Follow us
Watch our dang videos
Features
• Test the most commonly used connector types in live
sound and studio applications
o 1/4" TRS and TS
o 1/8" TRS and TS
o XLR
o RCA / Phono
o Speakon
o MIDI
o Banana
• Quickly verify each pin via the 6-way switch
• Manually check continuity with the supplied probes
• Powered by a single 9v battery
• Built-Like-A-Tank™ construction
Important Safety Instructions ........................................2
Contents ...........................................................................3
Features ............................................................................3
Introduction .....................................................................3
How To Use This Manual .................................................3
Getting Started ................................................................3
Things To Remember .......................................................3
MTest-1 Cable Tester: Top and Side Panel Features .....4
1. 9V Battery ..............................................................4
2. Battery Check LED ...............................................4
3. Top Panel Input Jacks and LED ...........................4
4. Ground LED ...........................................................4
5. Non-Cable Tester Knob and LEDs .......................4
6. 6-Way Knob ..........................................................4
7. Side Panel Input Jacks .........................................5
8. Pin Indicator LEDs ................................................5
Appendix A: Service Information ....................................6
Appendix B: Technical Information ................................7
MTest-1 Cable Tester Dimensions ...........................7
MTest-1 Cable Tester Block Diagram ......................8
Limited Warranty .............................................................9
Introduction
Never play the guessing game with cables again. Featuring
a simple 5-way switch to test every pin, even with mismatched
connectors, the battery-powered MTEST-1 is an essential tool
to have in your bag for every gig. You can even manually test
continuity between any two points with the included probes.
Equipped with the most commonly used connector types
including TRS, TS, XLR, RCA, Speakon, 3.5mm TRS, MIDI,
and Banana jacks.
How to Use This Manual
After this introduction, a getting started guide will help you
set things up fast.
This icon marks information that is critically
important or unique to the MTest-1. For your own
good, read and remember them.
Getting Started
The following steps will help you set up the MTest-1 Cable
Tester quickly.
1. Insert 9V battery.
2. Connect one end of the cable to the proper input jack
and the other end of the cable to the proper output jack.
3. Rotate the knob to verify cable / battery / ground status
Things to Remember
• Never listen to loud music for prolonged periods.
Please see the Safety Instructions on page 2 for
information on hearing protection.
• Save the shipping boxes and packing materials!
You may need them someday. Besides, your pet
hamsters will love playing in them and jumping out
at you unexpectedly. Remember to pretend like you
are surprised!
• Save your sales receipt in a safe place.