LG UBK80 HDR UHD Blu-ray Disc Player - Manual (Page 10)

2 Connecting
Connecting 10
Connecting
2
Connecting to Your TV
If you have a HDMI TV or monitor, you can connect it
to this player using a HDMI cable (Type A, High Speed
HDMI ™ Cable). Connect the HDMI (HDMI OUT TO
TV) jack on the player to the HDMI jack on a HDMI
compatible TV or monitor.
Rear of the unit
TV
HDMI cable
Set the TV’s source to HDMI (Refer to TV’s Owner’s
manual).
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
,
Note
Additional Information for HDMI
y When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then
switch on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 576p (or 480p), 1280 x 720p,
1920 x 1080i, 1920 x 1080p, 3840 x 2160P
video input
y Not all HDCP-compatible HDMI or DVI devices will
work with this player.
- The picture will not be displayed properly with
non-HDCP device.
y If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or may
not output.
y When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 11)
y Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (see page
20).
y Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the player and then turn it on again.
y When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
y If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m, 14.76 feet).
,
Note