EverFocus EQ610 - Manual (Page 11)

- 10 -
4. RS-485 CONNECTION
1. Connect the cable from keyboard or DVR RS485 port to the camera’s RS485 port.
2. Connect the cable from video output BNC of the camera to a monitor or DVR input BNC.
3. The RS485 ID set in the OSD Menu on the camera has to be the same as CAM ID used by the
keyboard or DVR to control this camera. (Please refer to “5.5.3 RS-485” for RS485 setup detail)
4. The baud rate has to be the same for all RS-485 devices on the bus. (Please refer to “5.5.3
RS-485” for RS485 setup details.)
5. The EQ610 is programmed using Pelco D type protocol
6. Note that the SET/ENTER function to call up the camera menu and to confirm choices is
performed by the IRIS + button on the keyboard or DVR.