Declaration of confirmation, Additional information – LG TONE Free FP5 True Wireless In-Ear Headphones (Charcoal Black) User Manual
Page 7
Item
Comments
Bluetooth Specifications
V 5.2 (Headset/Hands-Free/A2DP/AVRCP)
Battery
Earbud : 3.7 V / 55 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds & With
Charging case
ANC Off : Up to 8 & Up to 22 hours*
ANC On : Up to 5 & Up to 13 hours*
Charging Time
Earbud : within an hour / Charging case : within 2 hourFast Charging : 5 min charge for up to 60 min playtime*
※
When charging wired at room temperature
Rated Input Voltage
Earbud : 5 V
110 mA
Charging case : 5 V
500 mA
Operating Temperature
0 °C ~ +40 °C
Operating Humidity
5 % ~ 60 %
Dimensions (mm) / Weight (g)
Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H) / 5.2 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H)/ 35.4 g
Frequency range
Output Power (Max)
2402 MHz to 2480 MHz
11.5 dBm
*Duration of use may vary depending on the connected mobile device, features being used, settings, signal strength, operating temperature, frequency band, and other
methods of use.
Declaration of Confirmation
FCC NOTICE TO USERS: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the user’s authority to operate the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that twhich the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and logos are trademarks of Google LLC.
FCC ID: ZNFTONEFP5
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth-equipped mobile device by receiving and
transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth headset is designed to operate in
compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible LG Electronics
mobile phone.
2. Bluetooth connection precautions
The following environments affect the range and reception of Bluetooth signals:
– When walls, metal, human bodies, or other obstacles exist between the Bluetooth device and the connected device.
– When equipment that uses 2.4 GHz frequency signals (wireless LANs, wireless phones, microwave ovens, etc.) is placed near the devices being used.
– When using a Bluetooth device (TV, laptop, etc.) other than the mobile phone, the sound quality may be affected by the specifications and performance of the
device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often but not always
clearly marked.
4. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device connected to the headset operate using radio signals and mobile and landline networks as well as userprogrammed
functions, which cannot guarantee connection under all conditions. Therefore, you should never rely solely upon any electronic device for essential communications
(e.g., medical emergencies). Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be switched on and
in a service area with adequate mobile signal strength. Emergency calls may not be possible on all mobile phone networks or when certain network services and/or
phone features are in use. Check with your local service provider.
5. Battery information