beautypg.com

Fitting, Quick tips warning, Troubleshooting – JLab Audio JBuds Air Executive True Wireless Earbuds (Black) User Manual

Page 3

background image

Try the optional Cush Fins and all

ear tips for best fit and proper seal.

FITTING

• Fully dry off the earbuds before putting in the charging case.
• The left or right earbud can be used independently for music and phone

calls. Simply choose one and take out of the case to connect.
• Choosing the correct ear tip makes a significant improvement in audio

quality due to the proper seal for the driver. Test all ear tips for best

results.
• Only ONE Bluetooth device can be connected at a time. Turn off

Bluetooth on unwanted devices and turn on Bluetooth on chosen

device to connect.

QUICK TIPS

WARNING

CUSH FIN

EAR TIP

Place the earbud in

the ear canal and

slightly rotate to

adjust for best fit.

Fully dry off the earbuds before

placing in the charging case.

If the earbuds are damp or wet,

this will cause damage to the

charging case. The warranty will

be voided if the charging case

shows damage by water/sweat.

TROUBLESHOOTING

NO AUDIO IN LEFT EARBUD OR EARBUDS DISCONNECT FROM EACH OTHER

(MANUAL RESET)

BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT

Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig

1

Turn OFF then ON Bluetooth. Fig

2

1

2

Take the earbuds out of the case. Wait for one to turn solid white and the

other to blink blue/white.

Select “JLab JBuds Air Executive” in device settings to reconnect.

3

4

Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig

Open the charging case door and leave both earbuds inside. Starting with ONE earbud,

quickly tap the touch sensor 7x times. Light will blink blue 3x times.

Leave the earbuds in the charging case. Fig

Repeat with the other earbud. Quickly tap the touch sensor 7x times.

Light will blink blue 3x times. Fig

3

Take both earbuds out of the charging case and keep them within 2 inches from each other.

Wait for one earbud to turn solid white and the other to blink blue/white.

You are now ready to pair to your Bluetooth device.

4

A

A

B

Instructional videos at: JLAB.COM/MANUALS

A

Bluetooth

Settings

JLab JBuds Air Executive

i

Bluetooth

Settings

B

C1

C1

C2

C2

This manual is related to the following products: