Fj-x3: remote zoom, Remote fj80 series zoom control [single group, Remote fj80 series zoom control [all groups – Westcott FJ200 Strobe 3-Light Backpack Kit with FJ-X3m Universal Wireless Trigger User Manual
Page 16: Enabling the modeling lamp, Enabling an audible beep
FJ-X3: Remote ZOOM
Remote FJ80 Series ZOOM Control [Single Group]
1.
Long press the
Modeling Lamp
icon [
]
(right)
on the
Control Pad
to enter the ZOOM menu.
2. Press the up or down arrows on the
Control Pad
to locate the group for which the ZOOM needs
adjusting.
3. Quick-Press the center button on the
Control Pad
to adjust the ZOOM setting [0-5}.
4. Press the up or down buttons to adjust the FJ80 ZOOM settings.
5. Press the center button to confirm the FJ80 ZOOM selection.
6. Long-press the Modeling Lamp icon [
] again to return to the Main Menu.
Remote FJ80 Series ZOOM Control [All Groups]
1.
Long press the
Modeling Lamp
icon [
]
(right)
on the
Control Pad
to enter the ZOOM menu.
2. Long press the
Sound Selection Button
[
]
(left)
on the
Control Pad
to highlight all groups
[A-F].
3. Press the
Control Pad’s
center button to adjust the FJ80 ZOOM setting [0-5].
4. Press the up or down arrows on the
Control Pad
to adjust the FJ80 ZOOM settings.
5. Press the center button again to confirm the FJ80 ZOOM selection.
6. Long press the
Modeling Lamp
icon [
] again to return to the Main Menu.
Enabling the Modeling Lamp
1. Using the Control Pad select the
group for which you wish to change the modeling lamp status.
2. Press the
Modeling Lamp
icon [
]
(right)
on the Control Pad to enable the Modeling Lamp.
3. The
Modeling Lamp
icon [
] will be displayed on the screen when active.
Enabling an Audible Beep
1. Using the Control Pad select the
group for which you wish to change the audible beep.
2. Press on the [
]
(left)
on the
Control Pad
to enable the audible beep.
3. The [
] icon will be displayed on the screen when active.
NOTE: Control of the audible beep
only applies to FJ flash models equipped with the recycle beep
functionality.
15