Profoto B10X OCF Flash Duo Kit - Manual (Page 24)

B10
X,
B10
X Plus
24
www.profoto.com
Menu settings
All settings listed below are accessed through the settings menu.
Air group
The AIR GROUP setting is used to select the group (A-F) for wireless
control via Profoto Air. Factory default setting is group A.
NOTE
The AIR GROUP setting is only selectable when AIR is set ON.
Air channel
The AIR CHANNEL setting is used to select the channel (1-20) for
wireless triggering via Profoto Air. Factory default setting is channel 1.
NOTE
The AIR CHANNEL setting is only selectable when AIR is set ON.
Air
The AIR setting can be set to ON or OFF to activate or deactivate
Profoto Air wireless functionality. When Air is deactivated, “AIR OFF” is
shown at the bottom left of the display [9]. When Air is activated, the set
channel and group, ex “1 A” is shown at the bottom left of the display [9].
NOTE
If AIR is ON channel and group must also be selected. For additional guidance how to
set up Air, see the section “Connectivity”.
Bluetooth
The BLUETOOTH setting is used to manage connectivity with the
Profoto app. See also section Profoto app connectivity.
• DISCOVERABLE: Select ON to make the B10X/B10X Plus
discoverable and OFF to deactivate Bluetooth. When Bluetooth
is activated, a Bluetooth icon is shown at the bottom of the main
screen of the display [9].
• DISCONNECT: This is only selectable if the Bluetooth is
activated and connected to the Profoto app. Can be selected
to force disconnection from the Profoto app without turning off
Bluetooth.