Profoto B10X OCF Flash Duo Kit - Manual (Page 17)

B10
X,
B10
X Plus
17
www.profoto.com
Setup on light stands
Before mounting the B10X/B10X Plus onto a light stand, you need to
attach the stand adapter. Once the stand adapter is attached, follow
the instruction below.
1. Mount the Stand stud mount [13] onto the stand stud and secure
with the Clamp screw [14].
2. Loosen the Tilt lock knob [16] to adjust the tilt position.
3. Tighten the Tilt lock knob [16] to lock the tilt position.