Elinchrom D-Lite RX One/One Softbox To Go Kit User Manual
Control panel function setting, Programming
Down / Up
Power
On / Off
Ready charge beep
Manual trigger
Test
On / Off
Photocell
prop/min/max/o
ff
/
Modelling lamp
Press together
Master reset
On
Eye cell pre-flash sensor
Press
4s
Programming
Programming
and turn on the unit
Enter
into
menu
Toggle
sub-menu
Auto count the flash
Visual flash control
Set Modelling Lamp to turn off
during recharge
Press
2s
Press
2s
Press
4s
Press
together
Set with
Set with
Set with
Set with
Set with
Off
No pre-flash
Between 70-490 ms
6 pre-flash
<
>
<
>
<
>
<
>
Group 1 to 4
Channel 1 to 8
<
>
Speed mode
1 stop
1/10
5/10
Set with
Set with
Set with
Proportional modelling lamp
set up
Set Modelling Lamp to 50%
on 250ws Head for proportionality
with 500ws Head
Charge ready beep set-up
Set ready beep between 70-490 ms
Power & modelling
steps set-up
Set power change to steps 1/10,
5/10 or up to 1/1 f-stop
Red eye pre-flash recognition
EL-Skyport activation
EL-Skyport group settings
EL-Skyport frequency
channel settings
Normal mode
On
Off
On
Off
Master reset
Changes are saved automatically after 4s
Switch off the unit than press together
and turn on again
CONTROL PANEL
FUNCTION
SETTING
Centred umbrella tube for EL Umbrellas 7 mm diameter
Mains on/o
ff
switch
Sync socket / 3.5 mm jack
Eye-Cell on/o
ff
programmable
Open flash / Test
Mains fuse (F4AT / 250V / 5 x 20mm)
Eye-Cell receptor
Charge ready beep on/o
ff
Standard stand socket 5/8 inch
Knurled clamp screw
Extra umbrella fitting
Power up & down and scroll/program
for advanced features setup
Digital multi display
Mains inlet socket
Tilt head
Modelling lamp mode (prop/min/max/o
ff
/)