VIEWSONIC VP2785-2K 27" 16:9 IPS Monitor - Manual (Page 49)

49
Menu Option Description
Auto Power Off Enable this option to allow the monitor to automatically
turn off after a certain amount of time.
Sleep Set the amount of idle time before the monitor enters Sleep
mode .
Ambient Light
Sensor
Automatically adjust the monitor’s brightness to the
optimal settings based on the level of brightness in your
environment.
Presence Sensor Enable this option to allow the monitor to switch to Power
Saving mode (backlight off only) when you are absent for
more than 15 seconds and turns the backlight on again
when you return after 3 seconds.
• Level 1: Detects your presence in front of the monitor
within a short distance (approximately 30 cm).
• Level 2: Detects your presence in front of the monitor
within a medium distance (approximately 60 cm).
• Level 3: Detects your presence in front of the monitor
within a long distance (approximately 100 cm).
Multi-Picture Off
Disable this function.
PBP Left-Right
Display two windows, a 1x1 split screen, side-by-side on
the left and right of the screen. User can specify the input
source for each screen. For more information, refer to the
“PBP (Picture-by-Picture)” section on page 54.
PIP
Split the screen into two parts, a main window and an inset
window. User can specify the input source for each screen.
For more information, refer to the “PIP (Picture-in-Picture)”
section on page 56.
Dual Color
Display two different color settings in PIP or PBP mode. For
more information, refer to the “Dual Color” section on page
57.
ECO Mode Choose between various modes, based on power
consumption.
DisplayPort Enable DisplayPort 1.1 or 1.2 support.