VIEWSONIC VP2785-2K 27" 16:9 IPS Monitor - Manual (Page 17)

17
DisplayPort/USB Type C MST Daisy Chain Connection
With DisplayPort/USB Type C Multi-Stream Transport (MST) support, you can daisy
chain connect up to two (2) monitors.
NOTE: Your graphics card should be DP 1.2 compliant and support MST mode.
1. Connect one end of a DisplayPort/USB Type C cable to the DisplayPort Out/USB
Type C Out port of your computer. Then connect the other end of the cable to the
DisplayPort In/USB Type C In port of the monitor.
2. Use another DisplayPort cable to connect to the DisplayPort Out port of the first
monitor. Then connect the other end of the cable to the DisplayPort In port of
the second monitor.
Type-C
Out In Out In
Out In
1
Type-C Type-C
2
Or
NOTE:
• The max resolution is 2560 x 1440.
• DisplayPort 1.2 MST must be turned on in the Setup Menu in the OSD
Menu to do daisy chaining.
• If the input source changes to HDMI, DisplayPort 1.2 MST will turn off
automatically.
DisplayPort
In
DisplayPort
Out
USB C