Electrolux 40850 - Manual (Page 31)

31
Free-standing appliances
1
If the dishwasher is installed directly next to a cooker, a heat-insulat-
ing, non-flammable panel (laminated with aluminium foil on the side
next to the cooker) must be fitted flush with the top edge of the work
surface (depth 57.5 cm).
If the appliance is built-in under a
kitchen work surface, the worktop
supplied with the dishwasher can be
removed in the following way:
1. Unscrew the screws from the elbows
at the rear (1).
2. Push the appliance’s worktop back-
wards about 1 cm (2).
3. Lift the worktop at the front (3) and
remove it.
1
If the dishwasher is later used as a free-standing appliance, the work
surface supplied with it must be re-mounted.
3
The plinth on free-standing appliances is not adjustable.